Skip to product information
1 of 16

Surfacelogix

Cobble Loc Semi Gloss

Cobble Loc Semi Gloss

Regular price $105.95 USD
Regular price Sale price $105.95 USD
Sale Contact us for availability.
Shipping calculated at checkout.
This product may be available for pickup

Cobble Loc (Original/Semi-Gloss) is the newest technology in waterborne protection for concrete pavers, natural stone, stamped concrete, concrete surfaces and our TD One Step.

A two-part, water-based kit, Cobble Loc allows the applicator to clean and seal pavers in the same day, even on damp surfaces. Provides an enhanced, wet look appearance and semi-gloss finish like traditional solvent-based sealers, in an eco-friendly, low-VOC formulation.

Combined in a 1:1 ratio with water to create the final product, a 1-gallon kit of Cobble Loc will make up to 2 gallons of finished product and a 5-gallon kit of Cobble Loc will make up to 10 gallons of finished product. Each gallon of finished product covers approximately 200 sq. feet, depending on your surface. Unlike other clear finishes, Cobble Loc has excellent resistance to brake fluid, gasoline, bleach, and acids.

FOR PROFESSIONAL USE ONLY

Cobble Loc Features

  • Water based sealer for concrete pavers, natural stone and concrete surfaces
  • Eco-friendly and low VOCs (less than 50g/l)
  • Pressure clean and seal bricks same day
  • Same wet look and enhancement as solvent based sealers
  • Provides water and tire marking resistance
  • May be applied over damp surfaces
  • Helps lock down joint sand
  • Inhibits weed growth and anthills
  • Catalyzed product that provides chemical resistance to gasoline and oil leakage
  • Excellent paver sealer and protectant from various stains

Cobble Loc Applications

  • Clear protective coating for concrete pavers and surfaces
  • Preserves and protects travertine, natural stone and most porous surfaces
  • Excellent top coat over ColorcreteColoron, and TD One Step
  • Provides chemical protection against brake fluid, gasoline, bleach and acids
  • Protects concrete tile roofs
  • Used in paver repair and maintenance
  • Applied after concrete stamps utilization to produce natural and realistic results

Cobble Loc Product Directions

Surfaces must be clean and free of any contaminants before sealing. Concrete should cure a minimum of 28 days before sealing. On smoothly troweled concrete, an acid etch is recommend using muriatic acid.

Cobble Loc contains a part A and part B that must be mixed together. On pavers, dilute with one part water to one part mixed sealer and apply with roller or sprayer.

For best results, it is recommended to mechanically mix with a power mixer for a minimum of 2 - 5 minutes.  Apply a uniform coat heavy enough to wet out joints if sand stabilization is desired. A second coat of sealer may be appropriate depending on the porosity of the substrate.

The 2nd coat can be applied after 4-6 hours of dry time. As a topcoat over ColoronColorcrete or TD One Step apply a uniform coat undiluted by water. To avoid buildup of sealer, do not apply Cobble Loc more than once every 2 years.
 

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.

COBBLE LOC IS NOT RECOMMENDED ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.

FOR PROFESSIONAL USE ONLY

 

Cobble Loc Technical Data Sheets:

Download PDF View/Download Cobble Loc Technical Data Sheet-English

Download PDF View/Download Cobble Loc Technical Data Sheet-Spanish

Download PDF View/Download Cobble Loc Sell Sheet 

Important Notices

READ LABEL THOROUGHLY BEFORE USING PRODUCT.

CONTACT US WITH ANY QUESTIONS.

View full details