5 Gallon Pail of Texture Deck

Texture Deck

SKU#:  TD

SurfaceLogix' Texture Deck System has been the standard for concrete resurfacing since 1985. Use the Texture Deck Bags with the RTU resin or 48% resin concentrate to create a variety of patterns on old and new concrete. When mixed properly, the Texture Deck System can be applied to create a knock-down texture finish, stone finish, and a variety of patterns using tape or stencils.

  • Economical concrete resurfacer
  • Stronger than conventional concrete
  • Unlimited patterns and designs on concrete
  • Works on old and new concrete
  • Product for decorative concrete resurfacing
  • Pool decks
  • Driveways
  • Patios
  • Walkways
  • Concrete Decor

Apply the Texture Deck System to clean and dry concrete. Smooth concrete will need to be acid etched. A coat of cut resin can be applied as a bonding agent to ensure better adhesion. Wait 30 minutes after rolled bond coat is applied and no longer than 5 days to do the job.

In a clean 5 gallon pail start with 4 to 5 quarts of RTU resin or the 48% concentrate resin (cut in half with water 50/50). Slowly add, with drill mixer ready in bucket, one 50lb Texture Deck bag of powder. Mix entire bag into the bucket until a uniform pancake batter consistency is achieved. Allow to sit for 3 minutes then add a pint clean water on top of the blend and remix for 1 minute. Use this bucket up within 45 minutes as the product will begin to set up.

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT

MSDS available at request
ECO Earth Friendly Formulation
Click below for printable datasheet View FileTexture Deck Datasheet    Size: (666.01 KB)


 
 
 
Subscribe  Newsletter
 
Follow Us
 
 
Contact  SurfaceLogix