5 Gallon Pail of Roof Loc

Roof Loc

Same Day Clean & Seal
SKU#:  131R

Roof Loc is the newest technology in water based protection for concrete and cement roof tiles and shingles. Resists ultraviolet light, fading, mildew and algae, to keep your roof looking great longer between cleanings.

A two-part, water-based kit, Roof Loc allows the applicator to clean and seal in the same day, even on damp surfaces. Perfect for roof tiles that have already experienced fading, Roof Loc provides an enhanced, wet look appearance and semi-gloss finish to bring back the life of your roof, in an eco-friendly, low-VOC formulation.

Combined in a 1:1 ratio with water to create the final product, a 1 gallon kit of Roof Loc will make up to 2 gallons of finished product and a 5 gallon kit of Roof Loc will make up to 10 gallons of finished product. Each gallon of finished product covers approximately 200 sq. feet, depending on your surface. Featuring a specially formulated mildewcide and algaecide, Roof Loc provides additional, lasting protection against mildew and algae.

Not ready to commit? Need to do an adhesion test over an existing coating, or just want to see how this looks on your unique surface? Roof Loc comes in a convenient quart sample kit so you can try it out before placing a large order. Simply select the "quart sample" option from the product size dropdown.

Please note: 5 gallon pail displayed. Read label thoroughly before applying product. Roof Loc is not recommended for use on surfaces where moisture is unable to dissipate.

FOR PROFESSIONAL USE ONLY

  • Water based sealer for cement roof tiles and shingles
  • Eco-friendly and low VOCs (less than 50g/l)
  • Clean and seal tiles same day
  • Same wet look and enhancement as solvent based sealers
  • Provides water and stain resistance
  • May be applied over damp surfaces
  • Resists mildew and algae
  • Resists ultraviolet light and fading
  • Catalyzed product that provides chemical resistance to gasoline and oil leakage
  • Excellent roof sealer and protectant from various stains
  • Clear protective coating for cement roof tiles and shingles
  • Excellent top coat over Colorcrete, Coloron, TD One Step and Antique Stain
  • Provides chemical protection against brake fluid, gasoline, bleach and acids
  • Used in cement roof tile and shingle repair and maintenance


 

Surfaces must be clean and free of any contaminants before sealing. Concrete should cure a minimum of 28 days before sealing. On smoothly troweled concrete, an acid etch is recommend using muriatic acid.

Roof Loc contains a part A and part B that must be mixed together. On cement roof tiles and shingles, dilute with one part water to one part mixed sealer and apply with roller or sprayer. For best results, it is recommended to mechanically mix with a power mixer for a minimum of 2 - 5 minutes. Apply a uniform coat heavy enough to wet out joints if sand stabilization is desired. A second coat of sealer may be appropriate depending on the porosity of the substrate. The 2nd coat can be applied after 4-6 hours of dry time. As a topcoat over Coloron, Colorcrete or TD One Step, apply a uniform coat undiluted by water. To avoid buildup of sealer, do not apply Roof Loc more than once every 2 years.
 

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT

FOR PROFESSIONAL USE ONLY

MSDS available at request
ECO Earth Friendly Formulation
Click below for printable datasheet View FileRoof Loc Technical Data Sheet    Size: (612.59 KB) View FileRoof Loc Ficho de datos    Size: (612.71 KB)


 
 
 
Subscribe  Newsletter
 
Follow Us
 
 
Contact  SurfaceLogix