1 Gallon of PFT 1000

PFT 1000 2 Gallon Kit

Polyaspartic Flooring Technology Decorative Concrete Protective Coating
SKU#:  PFT-1000 2GKIT

PFT 1000 is the newest technology in decorative concrete coatings. Polyaspartic flooring technology (PFT) is the most durable coating available for concrete flooring. It dries quickly and provides unparalleled rapid return to service.

A two-part kit, PFT 1000 is flexible and allows for natural concrete movement and is highly resistant to cracking and peeling, making this system ideal for either indoor or outdoor applications.

PFT 1000 has excellent resistance to a variety of harsh chemicals such as brake fluid, gasoline, bleach and acids. PFT 1000 has excellent resistance to UV rays.

PFT 1000 is ideal for garage floors, warehouses, and driveways. The exterior durability is unlike typical epoxies. .

Each gallon kit of finished product when mixed properly according to directions, covers approximately 400 sq. feet.

Please note: 1 gallon pail displayed. Read label thoroughly before applying product.

FOR PROFESSIONAL USE ONLY

  • Solvent based solid color coating for concrete surfaces
  • May be used with decorative flakes or quartz systems
  • Dries quickly allowing rapid return to service
  • Excellent resistance to UV rays
  • Provides resistance to brake fluid, gasoline bleach and acids
  • Flexible allowing for natural concrete movement
  • Highly resistant to cracking and peeling
  • Ideal for either indoor or outdoor applications
  • Exterior durability is unlike typical epoxies
  • May be applied too garage floors, warehouses and driveways
  • Solid color coating for concrete surfaces
  • May be used with decorative flakes or quartz systems
  • Most durable coating available for concrete flooring


 

New concrete should be allowed to cure for a minimum of 28 days. The concrete must be structurally sound, dry and free of grease, oils, coatings, dust, curing compounds and other coatings or contaminates.

Surface laitance must be removed. Application on surfaces above 100°F and below 55°F may result in improper adhesion and performance. Testing on your surface is always recommended to ensure desired results. PFT 1000 contains a Part A and Part B that must be mixed together. Only use the correct ratio of Part A and B as purchased. Pour Part B into the Part A in a separate container and mechanically mix with a power mixer for a minimum of 2 to 3 minutes, without whipping air into the container.

Mix only what you can apply within 45 minutes. Do NOT thin material during or prior to application. PFT 1000 can be applied with a notched squeegee or a short nap lint-free roller.
 

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT. PFT 1000 IS NOT MEANT AS A MOISTURE BARRIER COATING.

FOR PROFESSIONAL USE ONLY

MSDS available at request
ECO Earth Friendly Formulation
Click below for printable datasheet View FilePFT-1000 Technical Datasheet    Size: (636.42 KB)
Related Products
Product Video



 
 
 
Subscribe  Newsletter
 
Follow Us
 
 
Contact  SurfaceLogix