Cobble Coat H20 is a clear water borne sealer that can be used to protect and beautify concrete, brick pavers, and our Texture Deck System. Cobble Coat H20 may also be used over travertine, natural stone and most porous surfaces as it has excellent water resistance and marking resistance. Cobble Coat H2O is an excellent topcoat over our Colorcrete Sealer and our TD One Step System where added UV and wear protection are needed. The coating dries semi-gloss; it does not enhance.
-
Eco friendly and low VOC
-
Helps stabilize joints between pavers
-
Helps minimize mold and algae growth
-
Inhibits weeds and anthills
-
Leaves natural look with a satin finish
-
Enhances but doesn’t darken paver
-
Protects concrete and brick substrates
-
Also can be used to protect marble and porous stone
-
Top coating to previous coatings of Colorcrete and TD One Step
-
Concrete floor coatings
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants bust be removed. Cobble Clean and Cobble Prep may be used for specific cleaning situations. Concrete should cure a minimum of 28 days before sealing. Interlocking brick does not require etching. Two thin coats provide the best results. Do not apply Cobble Coat H2O more frequently than every 18 months to avoid buildup of the sealer.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT