Antique Stain is a solvent based, semi-transparent blend of acrylics with pigments that deeply penetrate concrete substrates and create concrete acid stain look, without the use of acids. Antique Stain can be applied over Texture Deck, old and new concrete, brick pavers and SurfaceLogix’ Colorcrete Sealer. Antique Stain is also excellent product used to rejuvenate dull looking pavers and stamped concrete.
-
Used to beautify and protect any bare concrete indoor or outdoor
-
Available in 21 standard colors
-
Custom colors on request, colors can be intermixed for custom look
-
Excellent paver protection against water and UV light
-
Creates acid stain look without acid
-
Deeply penetrating sealer for concrete
-
Old or new concrete and pavers
-
Provide different looks to Texture Deck
-
Can be applied to garage floors, walkways, and pedestrian malls
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed. Concrete should cure a minimum of 28 days before sealing. Cobble Clean and Cobble Prep may be used for specific cleaning situations. One coat (1 to 2 dry mils per coat) achieves the desired color.
Antique Stain should be top coated with Cobble Coat for extra protection (airless spray apply clear). Two thin coats of Antique Stain may provide the best results. Avoid dry rolling to prevent lapmarks. Do not apply Antique Stain more frequently then every 18 months to avoid buildup of the sealer.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT